Own creative projects
Quark - an electric track day car
Key features in the “Quark” project are simplicity, low weight, modularity and eco friendliness. As the name suggest, the car is reduced down to the basics and in that respect it is more like a motorbike than a car. A lot of effort has gone into making the design as feasible as possible. The car run on electricity with four wheel drive (one electric motor for each axle). The “tub” and chassis are a single unit made of carbon fibre. This way I have reduced the parts needed and also made the whole structure rigid. The double wishbone suspension is made of carbon fibre, lowering the weight even more, while increasing the strength. Battery stacks are placed in the central tunnel and in a compartment behind the seats. The car have a rather large boot, making it somewhat practical. To emphasize the eco-spirit, the “exoskeleton” can be made of environmentally friendly bamboo. As shown, there are several different styling and performance options, such as a spoiler pack, additional body panels, full roll cage, fenders and lights, etc.
This is a homage to the futuristic flying vehicle used by the villain "Zorglub" featured in the Spriou & Fantasio" comics by Andre Franquin. My version is a two seat sports model. It operates using four double propellers and fuelcell electric drive.
Inspired by small 6-legged robots and crabs, the "Crabot" is designed to do rescue operations in areas hit by earthquakes. Thanks to its six legs it can manouver in any terrain and have a very light foot print, compared to tracked excavators for example.The "Crabot" is teamed up with a small reconnaissance drone that is equipped with stereoscopic videocameras, IR-cameras and ground penetrating radar, in order to find survivours under collapsed buildings in a safe and efficient way. Furthermore, as ABB is one of the leading brands within industrial robotics, I put their logo on my imaginary concept
Tesla Model3 SW
I been wondering for a very long time why Volvo never bothered to do a proper match for the VW Golf. The C30 was 2-door only and kind of small and the current V40 is way too cramped in the rear seat and the boot to fit a family with kids. With this in mind I "wrapped" the current Golf in the shapes from the Volvo "40" -concepts and it worked out quite well. I call the result the "G40".
Porsche Panamera GT3 RS
This is what would happen if Porsche's inhouse tuning department went nuts with the new Panamera:
Opel Manta GTC - a European "Corvette!
What if GM would have let Opel have a go at the Corvette? I used the styling from the really cool Opel Monza Concept and the proportions from a Corvette (the lines of these cars worked well together!) to create a European iteration of the classic American sports car. Result: the Opel Manta GTC.
KAAB 99 L
When I saw the first production ready Koenigsegg CC at Paris Motorshow in 2000, I immediately thought there was something quite "Saabish" about it. Maybe it was something with the proportions, maybe the curved windsheild, or perhaps a mix of a lot of things. Anyway, since that day, I always wanted to see the Saab 99 design mixed with the Koenigseggs proportions - and here it is! The "KAAB 99 L"!
Renault Grand Espace
I liked the orignal idea with the Espace and I think the new one lost very much of that by going "cool and trendy" instead of "smart and elegant". It's not really an Espace anymore, rather an Anti-Espace - big but not very roomy. However, I liked the shapes and surfaces and therefore I had to try the new shapes on the old package - was it really impossible to do a smart AND cool Espace? No!
1970's Vs the present or "back to the Future"
This project was an attempt to re-design current front engined sports cars (with classic 60's propotions) as if they were mid engined with the proportions of the 70's wedge era. Here are the two most successful designs: The Maserati Bora GT and The Mercedes AMG C-111
Saab vs Porsche
This project was inspired by my car design tutor at Umeå Insitute of Design, Tony Catignani (himself a former Saab designer), who used to say he liked to think of Saab as a kind of Swedish Porsche. I always thought about that and with that in mind I made this mash up of a Saab 900 Aero (SPG for you Americans) with the proportions borrowed from a classic Porsche 911 Turbo (930-series). I call the result the Saab 9-11 (as in "9-3") Turbo Aero. After I was finished with the "Saab 9-11", I had a vision - what would a similar mash up between the proportions of a Porsche 928 and the bodywork of a Saab 9000 Turbo be like? Quite cool, it turned out ("Saab 9028 Sonett").
The "9-11" had a huge success on various Saab fan-sites on Facebook.
Peugeot 208 Remix
I really like the general proportions of the original Peugeot 208. However there are a few things I like to change, so I made this proposal in Photoshop:
> At the front end, I have made the grille wider and the head lights more simplified, for a cleaner and stronger look (the original grille is way to narrow and the headlights to messy).
> I added the classic air intakes on the hood, as seen on the 205 & 206, as well as a blacked out mask to give the interplay between windscreen and hood more drama.
> I tried to make the crease line and surfaces on the side panels/door more taut, to make the car feel more strong. I also remade the small rear side window, with more tension in the lines.
> I added black fenders to enhance the wheels better.
> I added a blacked out bumper to break up the massive back end and softened up the crease between side panel and back end.
Volvo V80 CC
My favorite subject: the Volvo MPV. Why doesn't this exist? Volvo used to be all about family values, care and smartness, so I think there should be a place for a car like this in the Volvo lineup. Target consumers: those who need 7 seats but doesn't want a SUV. It's time to make the MPV cool again.
A hybrid of a coupe, a SUV and an MPV.
What if Volvo didn't play it safe, stylingwise?
Main ideas: new architecture for Volvo, roominess, good visability, boldness and futurism.
Image based on the XC Coupe Concept.
VW Golf 8
A bold mix between the Golf and the Beetle. The car would be based on an electric platform and extend the interior space as much as possible. This rendering is a mix between photo manipulation and free hand sketching.
Saab PhoeniX 'Johan Wejedal Edition'
A quick Photoshop-job. I do admire Jason Castriotas work in general, but I found some features and proportions on the original of this particular car a bit strange and even un-Saabish, so tried to fix that...
Rolls Royce Phantom of the Seas yacht
An exploration of how Rolls Royce's design-DNA would work in a maritime setting.
Range Rover Evoque Cabriolet concept
This proposal was made by me 2010-09-22, almost 1 and a half years before Land Rover's own concept was shown (!). I used the Audi A3 cabriolet for the open top here. The real car was launched 2015-11-09!
More photoshopped cars can be found here at this link.
Photoshop car renderings
Image based on scanned thumbnail sketch. Idea: to make a modern interpretation of the classic European 70's futurist GT coupe concepts in the tradtion of Betrone, Ital Design and Pininfarina.
Futurist electric compact city car
Image based on scanned thumbnail sketch. Idea: to do a modern take on the bio-design of the early 90's and move away from the current trend of conservative looking cars with long hoods, big classic grille, a plethora of pointless crease lines and small DLO's that make the interior feel claustrophobic.
Lot of focus was put into creating a really shiny and reflective feel on the body surface. The car is supposed to be a small sporty familycar with fuelcell drive.
Homage to BMW i-series
I'm a huge fan of BMW's new futurist sub-brand BMW-i, so I made this as a tribute. It's a kind of combination between the styles of the i3, the i8 and the ConnectedDrive concept.
A Scania supertruck of the near future, made partly on a Wacom Cintiq screen and partly using a Wacom Sapphire. Aerodynamics and a sporty attitude were main objectives.
Graphic designVarious graphic design
Image inspired by the Swedish west coast. Based on own photograph.
Glass design made in 3DVarious glass items made in Alias
Sprial glass vase
"Sci-fi vase" for flowers of multiple lenghts
Drop shaped glass jug.
Kraftwerk inspired neonsign
The legendary German electronic band Kraftwerk used to have this kind of neonsign "autographs" standing in front of them at their concerts in the early years. As I am a fan of Kraftwerk's music and aesthetics, I thought it would be an interesting challenge to see if I could do one of my own in Alias.
CD cover art
Below: a collection of CD-covers I made for my MP3-collections and some I made as proposals to artists I'm acquainted with (please note: low resolution).
The Mobile Homes CD-R was made in eight copies, four of which was handed to the band during an interview I made for www.synth.nu .
Cover for a Marsheaux compilation
I compiled all songs by the Greek electronic band Marsheaux that (at this time) wasn't on any of their studio albums on a home made CD-R. The band loved the idea and the design. I later sent them a copy each.